Solution
Solution
Revolutionizing Fire Protection Technology
Dramatically changing the fire prevention industry by bringing new fire alarm and control system. Combining functions of detecting dangers, activating fire alarms and guiding safe evacuation, making safety absolute and comprehensive.
Revolutionizing Fire Protection Technology
Dramatically changing the fire prevention industry by bringing new fire alarm and control system. Combining functions of detecting dangers, activating fire alarms and guiding safe evacuation, making safety absolute and comprehensive.
Contact Us
Instant Response and Accelerated Evacuation
Sensors detect danger early in the fire through powerful high-sensitivity smoke and temperature sensors. Rapid alarm activation and planning safe evacuation routes.
Contact Us
Guaranteed Fire Safety of All Buildings
A total and unique solution for complete fire detection and evacuation, integrating floor plans with HEX's Dynamic Evacuation Signage Lights.
Contact Us
Situation A
Situation B
Situation C
Situation A
The top-left room and hallway has been filled with smoke. The evacuation route that typically leads through the currently smoke-filled hallway has been blocked off by the dynamic evacuation signs, and the evacuees are being guided around to use the exit in the front of the building or the other two on the left side.
Complete Life and Fire Safety System
Mode of operation: Adapted to the situation
The general mode of operation for optimal dynamic escape routing should be efficient and versatile. The floor is divided into compartments with two exits on the left side of the building and one at the front. According to current regulations, only one escape route needs to be signposted. If it cannot be used (during an emergency), evacuees will need to find additional escape routes. This will be time consuming and difficult as they are not signposted.
Contact Us
Situation A
Situation B
Situation C
The top-left room and hallway has been filled with smoke. The evacuation route that typically leads through the currently smoke-filled hallway has been blocked off by the dynamic evacuation signs, and the evacuees are being guided around to use the exit in the front of the building or the other two on the left side.
Mode of operation: Adapted to the situation
The general mode of operation for optical dynamic escape routing should be efficient and versatile. The floor is divided into compartments with two exits on the left side of the building and one in front. According to current regulations, only one escape route need to be signposted. If it cannot be used (during an emergency), evacuees will need to find additional escape routes. This will be time consuming and difficult as it is not signposted.